Hansebubeforum
Registrieren || Einloggen || Hilfe/FAQ || Suche || Memberlist || Home || Statistik || Kalender || Staff Willkommen Gast!


Hansebubeforum » 1/87 » LTM 1090/2 conversion from Kibri LTM 1160/2 » Threadansicht

Autor Thread - Seiten: -1-
000 — Direktlink
07.01.2020, 10:09 Uhr
SaminCZ



Hello, I want to show my current project - LTM 1090/2 converted from Kibri LTM 1160/2.

I compared basic "load charts" drawings and concluded that the conversion is basically possible.

[url=https://abload.de/image.php?img=1axeje5.png][/url]

The result won´t be 100% accurate for sure, main problem is the width of the LTM 1160/2 which is 3000mm and the smaller LTM 1090/2 is only 2750mm. Second error is the boom diameter that 160t crane has slightly bigger.

First task was cutting the frame and adjusting spacing of the wheel assemblies.

[url=https://abload.de/image.php?img=2ao9kty.jpg][/url]

Outriggers needed to be made from scratch and I cutted back part of the crane undercarriage.

[url=https://abload.de/image.php?img=3adyjip.jpg][/url]

Drivers cab needed smaller Windows so I made them from plastic sheet

[url=https://abload.de/image.php?img=4afcj2q.jpg][/url]

[url=https://abload.de/image.php?img=9angje8.jpg][/url]

Here is partially complete outriggers set made from layers of different thickness plastic sheets.


https://abload.de/image.php?img=5ad7jtx.jpg


https://abload.de/img/5ad7jtx.jpg


Thankfully there is a 3D model of the LTM 1090/2 on the Internet so I use it for generating side views and for measuring.




https://abload.de/image.php?img=5at8khk.png


https://abload.de/img/5at8khk.png



The 90ton needed brand new frame for upper body so that was made from plastic sheets and evergreen profiles.


https://abload.de/image.php?img=6ac9k47.jpg

https://abload.de/img/6ac9k47.jpg


160ton has longer and thicker boom. After studying drawings I cut 2 pieces from the boom. Distances were measured with digital caliper from boom head because boom head is only true part to rest of the boom. Pieces were cut with razor blade saw. Boom was than glued together.


https://abload.de/image.php?img=7asejq0.jpg

https://abload.de/img/7asejq0.jpg


https://abload.de/image.php?img=8a64k0d.jpg

https://abload.de/img/8a64k0d.jpg

Finally I want ask for help:

Do you someone have photos of the upper deck of the undercarriage? I need some reference for fenders panel scribing.

Do you someone have 3 side drawings of the lattice jib?



Edit: Bitte beachten: Nicht mehr als fünf Bilder , je Posting, bitte die Forenregeln respektieren. TAGs entfernt, Bild(er) verlinkt
--
no german, only english :-I
greetings from Czech Republic

Dieser Post wurde am 07.01.2020 um 17:34 Uhr von Burkhardt editiert.
Seitenanfang Seitenende
Profil || Private Message || Suche Zitatantwort || Editieren || Löschen || IP
001 — Direktlink
07.01.2020, 20:32 Uhr
Torsten Sch.



Very cool Projekt
Seitenanfang Seitenende
Profil || Private Message || Suche Zitatantwort || Editieren || Löschen || IP
002 — Direktlink
08.01.2020, 09:45 Uhr
Ulrichkober



Hey samin

veryinteresting projekt,very good job

best regard ulrich
Seitenanfang Seitenende
Profil || Private Message || Suche Zitatantwort || Editieren || Löschen || IP
003 — Direktlink
08.01.2020, 18:37 Uhr
Kufi

Avatar von Kufi

very interesting project, good luck.
--
Das größte Maul und das kleinste Hirn,wohnen meist unter derselben Stirn (Hermann Holz).
Seitenanfang Seitenende
Profil || Private Message || Suche Zitatantwort || Editieren || Löschen || IP
004 — Direktlink
12.01.2020, 22:14 Uhr
SaminCZ



Thank you guys for support.

Upper structure "boxes" need some shortening but pieces from kibri are useable.

[url=https://abload.de/image.php?img=13adkka9.jpg][/url]

Drivers cab is now filled and sanded, holes for outriggers are covered from all sides, outrigger part is fitted without glue just for test.

[url=https://abload.de/image.php?img=14at2kpp.jpg][/url]

[url=https://abload.de/image.php?img=15almjs3.jpg][/url]

[url=https://abload.de/image.php?img=16aj8juh.jpg][/url]

Base for the undercarriage deck is made from plastic sheet with little plastic pin for guiding upper structure. Engine assembly is mostly scratch from plastic sheets but I used one modified part from kibri kit.

[url=https://abload.de/image.php?img=17a3fjbl.jpg]Bild "17a3fjbl.jpg" anzeigen.[/url]

[url=https://abload.de/image.php?img=18akjkad.jpg][/url]



https://abload.de/image.php?img=19afkjtc.jpg

https://abload.de/img/19afkjtc.jpg[/img



Finally here is overview of the crane putted together with tack-it for comparism with reference photos and drawings.


https://abload.de/image.php?img=10afrjbb.jpg

https://abload.de/img/10afrjbb.jpg



https://abload.de/image.php?img=11ae5jsd.jpg

https://abload.de/img/11ae5jsd.jpg



https://abload.de/image.php?img=12a44jpz.jpg

https://abload.de/img/12a44jpz.jpg



Edit: Bitte beachten: Nicht mehr als fünf Bilder , je Posting, bitte die Forenregeln respektieren. TAGs entfernt, Bild(er) verlinkt
--
no german, only english :-I
greetings from Czech Republic

Dieser Post wurde am 12.01.2020 um 22:25 Uhr von Burkhardt editiert.
Seitenanfang Seitenende
Profil || Private Message || Suche Zitatantwort || Editieren || Löschen || IP
005 — Direktlink
12.01.2020, 22:58 Uhr
JSC



Great work - I am looking forward to seeing more!

Here are links to LTM 1090/2 pictures - let me know if you need pictures in higher resolution.

https://www.vorbildundmodell.net/vorbild/krane/ltm-1090-2-aks/
https://www.vorbildundmodell.net/vorbild/krane/ltm-1090-2-aks-2/
https://www.vorbildundmodell.net/vorbild/krane/ltm-1090-2-aks-3/
https://www.vorbildundmodell.net/vorbild/krane/ltm-1090-2-kampel/
https://www.vorbildundmodell.net/vorbild/krane/ltm-1090-2-k%C3%B6lbl/
https://www.vorbildundmodell.net/vorbild/krane/ltm-1090-2-prangl-nr-1026/
https://www.vorbildundmodell.net/vorbild/krane/ltm-1090-2-toman/
https://www.vorbildundmodell.net/vorbild/krane/ltm-1090-2-trost-nr-8905/
https://www.vorbildundmodell.net/vorbild/krane/ltm-1090-2-wanko-wien-nr-865/
https://www.vorbildundmodell.net/vorbild/krane/ltm-1090-2-wanko-wien-nr-870/
--
Schöne Grüße,
Josef
www.vorbildundmodell.net
Seitenanfang Seitenende
Profil || Private Message || Suche Zitatantwort || Editieren || Löschen || IP
006 — Direktlink
13.01.2020, 14:25 Uhr
SaminCZ



JSC: thank you for links, I have already downloaded all LTM 1090/2 photos from your website

admin: sorry, I missed your post about maximum number of photos per post. No I will keep that in mind for the next time.
--
no german, only english :-I
greetings from Czech Republic
Seitenanfang Seitenende
Profil || Private Message || Suche Zitatantwort || Editieren || Löschen || IP
007 — Direktlink
26.01.2022, 13:58 Uhr
SaminCZ



I don't like kibri mobile crane wheels without tread with just smooth surface so I went to learn 3D and designed my own Bridgestone VHS all-terrain mobile crane wheels. The wheel is fully compatible with kibri's rims in a snug fit. The wheel will be 3D SLA printed and then cast in resin together with Kibri spare rim - hollow center to be able later to add different wheel hubs to accommodate driven or non-driven crane axle.

[url=https://abload.de/image.php?img=mobilkran_pneu6rk2c.png][/url]

For my next project, I need to replicate non-skid surface on the crane chassis, so I drew the pattern in Corel and let the pattern be engraved to 0,3mm cardboard with laser. These are the test pieces and it turned nicely.

[url=https://abload.de/image.php?img=img_20211213_164433wnjyw.jpg][/url]

PS.: admin could you rename my thread to "Modelle von Samin"? It would be easier to post multiple projects in one thread.
--
no german, only english :-I
greetings from Czech Republic

Dieser Post wurde am 26.01.2022 um 14:01 Uhr von SaminCZ editiert.
Seitenanfang Seitenende
Profil || Private Message || Suche Zitatantwort || Editieren || Löschen || IP
008 — Direktlink
29.01.2022, 21:56 Uhr
JSC



Hey Samin,

The tire looks great, can"t wait to see the crane with it.
--
Schöne Grüße,
Josef
www.vorbildundmodell.net
Seitenanfang Seitenende
Profil || Private Message || Suche Zitatantwort || Editieren || Löschen || IP
009 — Direktlink
30.01.2022, 11:42 Uhr
Ron van der Velpen

Avatar von Ron van der Velpen

Nice job Samin, keep us updated .
--
Ron van der Velpen
www.vandervelpen.nl
Seitenanfang Seitenende
Profil || Private Message || Suche Zitatantwort || Editieren || Löschen || IP
010 — Direktlink
31.01.2022, 10:00 Uhr
SaminCZ



Thanks for replies.

Meanwhile I´m working on my next project involving more of the 3D modelling skills that I learned. The basekit is Kibri AC665 with FDM 3d printed boom (made from individual parts) that are sanded and primed with Mr. Surfacer 1000. Details are added from the styrene sheets and profiles. 10t stacked counterweight "towers" are 3d modelled and printed on my fellow scale modellers SLA 3D printer.





The Livery will be APB Plzen

https://www.apb-plzen.cz/demontaz-druhe-casti-zeleznicniho-mostu-v-plzni-hl-2
--
no german, only english :-I
greetings from Czech Republic
Seitenanfang Seitenende
Profil || Private Message || Suche Zitatantwort || Editieren || Löschen || IP
Seiten: -1-     [ 1/87 ]  


Linktips:

Kranliste von Carsten Thevessen

Kran-und Schwerlast-FAQ von Sebastian Suchanek

RAL Farbliste von Burkhardt Berlin


Hansebube.de - Modellbau und Vorbild

powered by ThWboard 3 Beta 2.84
© by Paul Baecher & Felix Gonschorek


Impressum und rechtliche Hinweise
Datenschutzerklärung